Bematech KC-4112 Rev.1.0 - Manual (Page 44)

44
- The ERROR and PAPER LEDs on the kiosk printer start blinking.
- Use the Output Window to follow the update progress.
- The flash update will take a few seconds. Do not power off the printer or computer after the update has
started.
- After the firmware update is complete the printer will be reset automatically.
Figure 62
Figure 63
C:\WinTesteMP\partial.bin Open
Start Cancel
Output Window Clear Output Window
Boot Loader Interfaces
Printer Test
File Name
57%
WinTestMP
OK
Upgrade OK!