Bematech KC-4112 Rev.1.0 - Manual (Page 11)

11
Key Panel
The key panel gives visual printer status and manual control to the operator.
These functions are accomplished using one switch and LEDs, described below:
• POWER LED: This green LED will be on whenever power is applied to the printer and the power switch is on.
• PAPER LED: This red LED will be on when the printer is without paper. If the print head is up, this red LED
will blink.
• ERROR LED: This red LED will blink in error conditions. See ERROR TABLE on page 25.
• PAPER FEED BUTTON: Use to feed paper line by line with fast button touches or feed paper continuously, by
pressing and holding down the button.
Removing Jammed Paper
Note: If the cutter remains blocked due to a paper jam, unplug the printer and use the manual lever to
move the cutter blade prior to perform the steps below.
If a paper jam occurs, follow the steps below:
• Cut the paper at the paper entrance.
• Unlock the presenter mechanism using the presenter lock.
• Unlock the head up switch raising the print head.
• Gently pull the paper out of the mechanism.
• Lock the head up switch back to initial position.
• Lock the presenter.