Technical specifications kc-4112 – Bematech KC-4112 Rev.1.0 User Manual

Page 16

Characteristics

Specifications

Printing

Method:

Thermal Line Printing

Dot Density:

8 dots/mm (203 dpi x 203 dpi)

Print Width:

104 mm (4.1”) (832 dot-positions)

Print Speed:

80 mm/s (3.15”/s) (text mode)

Characters per line:

34, 46, 69 and 92

Character Set:

Alphanumeric CP850 and CP437

Features

Modular design.
Automatic cutter (full and partial cut).
Presenter with retractable function: 450 mm/s (17.7”/s).
High reliability.
Low paper sensor (paper near end).
Automatic paper loading.
Bar code type: UPC-A, UPC-E, EAN13, EAN8, CODE 39, ITF, CODABAR,
CODE 93, CODE 128, ISBN, MSI, PLESSEY, PDF-417.

Communication

Buffer Capacity:

31 Kbytes

Interface:

Parallel (Unidirectional) and Serial(RS-232)

Serial interface specification:

• Baud rate: configurable 9600 or 19200
• Start bit: 1 bit
• Data bits: configurable 7 or 8 bits
• Parity bit: odd / even or no parity
• Stop bit: one bit or two bits

Power requirements

Voltage:

24 Vdc ± 10%

Current:

2 A nominal (4A load, 1s max.)

Operating temperature: 5 to +40ºC (+41 to +104°F)

Environment

Storage temperature:

-20 to +60ºC (-4 to +140°F) (except for paper)

Operating humidity:

35 to 80% RH, non condensing

Storage humidity:

10 to 90% RH, non condensing (except for paper)

Reliability

Print head service life: 100 Km, hundred million pulses
Cutter lifetime:

500,000 cuts

Media

Type:

Single-ply thermal paper roll

Thickness:

67 ± 5 um

Width:

111.0~112.0 mm (4.37~ 4.41”)

Roll diameter:

External 8” (maximum) with internal

1” core. Please contact your dealer for more
details.

* thermal side is on the outside of the roll.