Beisler 739-23-1 Manual User Manual
Page 25
5.3
Lubrication
Caution! risk of injury!
Lubricants may cause irritation to skin.Therefore avoid all contact with
skin. If skin is contaminated, clean thoroughly with plenty of water.
CAUTION!
The handling and disposal of mineral oils is regulated by law. Oil must
be disposed of through authorised dealers. Protect the environment
and never spill any oil .
To refill the oil tank, use only ESSO SP-NK 10 lubricant or a similar
product of the following specification:
Viscosity at 40° C:
10 mm2/s
Ignition point
150° C
ESSO SP-NK 10 is available from all DÜRKOPP-ADLER AG agencies
and has the following parts numbers:
2 litre container:
9047 000013
5 litre container:
9047 000014
Maintenance tasks
Description
Operating-
to be carried out
hours
Sewing machine head
The sewing machine head is equipped with a central oil
wick. All bearings are lubricated from oil tank 1.
- The oil level in the oil tank 1 may never fall below the
“MIN” mark.
- Refill tank through the opening in the window until the
oil level reaches the “MAX” mark.
8
Edge cutter
Lubricate the bearings of the edge cutter 2 with one
drope of il
8
1-25
1
2