Beisler 1281-4 - Manual (Page 43)

2-17
4 Use of the storage module
All sewing programs and the setup data are stored on the storage module
delivered with the machine.
Hint
The delivered module is a backup copy of the machine data. It should be
kept at a safe place.
4.1 Load data from the storage module
1. Switch off the machine using the mains switch.
2. Plug the storage module KK 195 into the slot on the right side of the
operation device.
3. Switch on the machine using the mains switch.
4. The display shows you what you can load from the storage module:
K K 1 9 5
S E T U P / P R O G
S E T U P
P R O G
D A T A T R A N S F E R F R O M K K 1 9 5 C H I P T O M O T O R
P R E S S + T O C O N T I N U E P R E S S T O C A N C E L
5. Press the Plus key.
6. Confirm the inquiry, whether the data contained in the machine’s memory
shall be overwritten.
7. Use the arrow keys to mark one of the three options (SETUP/PROG =
setup-data and sewing programs will be loaded; SETUP = only setup-data
will be loaded; PROG = only sewing programs will be loaded).
8. Press the Plus key.
9. Now you have to confirm the loading of data into the machine control:
K K 1 9 5
S E T U P / P R O G
S E T U P
P R O G
C A U T I O N ! O L D K K 1 9 5 D A T A W I L L B E E R A S E D
P R E S S + T O C O N T I N U E P R E S S T O C A N C E L
10.Press the Plus key to start the loading. The selected data will be loaded
into the machine control.
11. Then, setup page -02 will be displayed. Enter all data like described in
section 3.4.
12.Press the Special key. Program 001 will be displayed and the machine is
ready to use.