Beisler 1281-4 - Manual (Page 40)

2-14
8. Press the Special key to leave the setup page and store the changes.
9. Repeat this procedure for all inputs and outputs which you want to modify.
3.7.2 Settings for this machine
The inputs and outputs at this machine should be programmed as follows:
Inputs
Mouse backward
M1 Fn F11 ON
Stacker impulse
M2 Fn F7 ON
Pulling device up
M3 Fn F8 TOG
Mouse backward
M7 Fn F11 ON
Outputs
Table blowing
F2 100 100
Contour guiding up and blowing in the contour guiding
F3 STEP 5 30
Contour guiding backward / forward
F4 STEP 0 45
Kett-up
F5 0 450
Smooth-out device up/down
F6
STEP
800 100
Stacker impulse
F7 0 75
Pulling device up/down
F8 STEP 0 50