Beisler 1225-5 - Manual (Page 41)

8.4.5 Loading software version from the USB stick
– Enter parameter 523.
– Press key “E”.
The cursor flashes.
– Press key “F2”.
The name of the first file stored on the stick appears.
Example
20_5D_1A.PRG
– Select the desired parameter file with the keys “+” or “-”.
– Press key “E”.
The message appears.
READ DATA YES = E
– Press key “E” within 2 seconds.
The data are read from the USB stick.
– Press key “P” and wait approx. 3 seconds until “Save Data” fades
out.
– Press key “E” twice.
The cursor flashes.
– Press key “F2”.
The name of the first file stored on the stick appears.
Example
20_5D_2A.PRG
– Select the desired program file with the keys “+” or “-”.
– Press key “E”.
The message appears.
READ DATA YES = E
– Press key “E” within 2 seconds.
The data are read from the USB stick.
– Switch the main switch off and on again.
The new software version is loaded now.
37
1