Beisler 1225-5 User Manual
Page 19
3)
The trousers part is sewn.
4)
As soon as the workpiece has left the light barrier,the seam is
finished and both stamps 6 lower.
5)
The contour guide moves upwards.
6)
The swivelling device 5 transports the material out of the sewing
area.
7)
The stacker clamp 8 moves to the front.
8)
The stamps 6 move upwards again.
9)
The trousers part is stacked.
10) Actuate foot switch 7 for removing the workpieces.
Note
In order to facilitate the material feed in the area of the sewing head
the table blowing can be engaged. (see chapter 5.5)
15
1
6 5
8 7
This manual is related to the following products: