BECKHOFF ILxxxx-B520 - Manual (Page 23)

IL Config Object
ILxxxx-B520 20
3 IL Config Object
IL Config Object The ILxxxx-B520 provides the vendor specific object class to access its
status, diagnostic and configuration data. Within the IL Config Object the
full range of Registers and Status-Information of the ILxxxx-B520 and the
connected extension boxes is available.
The IL Config Object Class is Vendor specific and within in the Range of
the Vendor specific Class Codes.
Class Code:
100 (64hex)
Class Attributes
Attribute
ID
Access
Rule
Name Data
Type
Description Semantics of
Value
1 Get Revision UINT Revision of implementation 1
2 Get Max. Instance UINT Max. number of instances 1
Instance Attributes
Attribute
ID
Access
Rule
Name Data
Type
Description Semantics of
Value
1 Get/Set Terminal
Number
USINT Number of terminal 0: Coupler
>0: Channels
2 Get/Set Table Number USINT Number of table See ILxxxx-B520
/Channel Descrip-
tion
3 Get/Set Register Num-
ber
USINT Number of Register See ILxxxx-B520
/Channel Descrip-
tion
4 Get/Set Register Data DWORD Register Value see semantics
5 Get IL-Status BYTE Status of the ILxxxx-B520 see semantics
6 Get Extension Box-
Diagnosis
WORD Diagnosis of the extension
boxes see semantics
10 Get/Set IO Error Action BYTE Action to be performed if a
fieldbus error occurs see semantics
11 Get/Set Poll produced
data type
BYTE Type of IO data produced
via the Poll mode see semantics
12 Get/Set COS/ Cyclic
produced data
type
BYTE Type of IO data produced
via the Change of State /
Cyclic mode see semantics
13 Get/Set Bit Strobe pro-
duced data
type
BYTE Type of IO data produced
via the Bit Strobe / Cyclic
mode see semantics
14 Get/Set Poll / COS/
Cyclic con-
sumed data
type
BYTE Type of IO data con-
sumed via the Poll /
Change of State / Cyclic
mode see semantics