Delta 8" VARIABLE SPEED GRINDER GR450 - Manual (Page 9)

9
If the grinder has a tendency to tip over, slide, or walk,
secure it to the supporting surface, using fasteners (not
supplied) through the two holes (A) Fig. 7 in the grinder
base.
Always wear eye protection.
To attach the eye shields:
1. Place the eye shield (A) Fig. 4 on the spark guard.
2. Align the holes in the eye shield with the holes in the
spark guard. Place the eye shield spacer (A) Fig. 5
in the space in the spark guard.
3. Insert the eye shield bolt (A) Fig. 6 through the hole
in the eye shield (B), the eye shield spacer (C), and
the spark guard (D).
4. Place a 1/4" flat washer (E) Fig. 6 on the end of the
eye shield bolt. Attach the eye shield knob (F) to the
end of the eye shield bolt.
5. Install the other eye shield in the same manner.
Fig. 5
Fig. 6
Fig. 7
A
A
B
C
d
E
F
A
A
Fig. 4
FASTENING THE GRINdER A SUPPORTING SURFACE
Your grinder is supplied with two shields to protect your eyes.
EYE SHIELdS