BECKHOFF KL5001 - Manual (Page 5)

Technical data
KL5001 5
Technical data
Technical data KL5001
Sensor connection binary input: D+, D-; binary output: Cl+, Cl-
Power supply 24 V DC via power contacts
Current consumption typically 20 mA without sensor
Sensor supply 24 V DC (20 V ... 29 V)
Data transfer rate variable up to 1 MHz, 250 kHz default
Serial input 24 bit width (variable)
Data direction read
Signal output difference signal (RS485)
Signal input difference signal (RS485)
Electrical isolation 500 V (K-Bus / field voltage)
Current consumption from K-Bus 25 mA typ.
Bit width in the process image I: 1 x 32 bits data, (1 x 8 bits control/status optional)
Weight approx.. 80 g
Operating temperature 0°C ... +55°C
Storage temperature -25°C ... +85°C
Relative humidity 95%, no condensation
Vibration/shock resistance conforms to IEC 68-2-6 / IEC 68-2-27
EMC resistance Burst / ESD conforms to EN 50082 (ESD, Burst) / EN 50081
Installation position any
Type of protection IP20