BECKHOFF C9900-A172 - Manual (Page 9)

Product Description
Connector description
USB data transfer
USB Extension The USB extension connection (X 100) is used for transferring the USB
signal from the transmitter module to the receiver module.
USB input
USB Upstream The USB1.1 input (X 101) is used to connect the transmitter module with
the Industrial PC.
USB1.1 standard with a maximum data rate of 1.5 or 12 Mbps is
supported.
DVI input (Digital Visual Interface)
DVI-D In The DVI connection (X 102) is used for transferring the video signal from
the Industrial PC to the transmitter module.
The purely digital part (DVI-D) is supported.
DVI data transfer
DVI Extension The DVI extension connection (X 103) is used for transferring the DVI
signal from the transmitter module to the receiver module.
8 DVI/USB extension C9900-A17x