BECKHOFF C9900-A172 - Manual (Page 12)

Installation Instructions
Installation Instructions
Please also refer to chapter General Notes .
Transport and Unpacking
The specified storage conditions must be observed (see chapter Technical
data ).
Transport
Despite the robust design of the unit, the components are sensitive to
strong vibrations and impacts. Therefore please protect the modules or the
transmitter card from strong mechanical influences during transport.
Therefore, please use the original packaging.
Warning
Danger of damage to the unit!
When transporting the devices in cold weather or during strong
temperature fluctuations, condensation on or in the devices should be
avoided.
Adjust the devices slowly to room temperature before switching them on. If
condensation has formed, wait for approx. 12 hours before switching the
devices on.
Unpacking
Unpack the devices as follows:
1. Remove packaging.
2. Do not discard the original packaging. Keep it for future relocation.
3. Check the delivery for completeness by comparing it with your order.
4. Please keep the associated paperwork. It contains important
information for handling the unit.
5. Check the contents for visible shipping damage.
6. If you notice any shipping damage or inconsistencies between the
contents and your order, you should notify Beckhoff Service.
DVI/USB extension C9900-A17x 11