BECKHOFF C9900-A172 - Manual (Page 11)

Product Description
Pin Signal Pin Signal
Housing Screen 5 n.c.
1 TD + 6 RD -
2 TD - 7 n.c.
3 RD + 8 n.c.
X 104
DVI Extension
RJ-45 connector (Ethernet 10/ 100 Mbit)
4 n.c.
Connector description
Power supply
Power supply The power supply for the Control Panel is established via the Cage clamp
socket (X 100).
USB data transfer
USB Extension The USB extension connection (X 101) is used for transferring the USB
signal from the transmitter module to the receiver module.
USB output
USB Downstream The USB1.1 input (X 102) is used to connect the receiver module with the
Control Panel.
USB1.1 standard with a maximum data rate of 1.5 or 12 Mbps is
supported.
DVI output (Digital Visual Interface)
DVI-D Out The DVI connection (X 103) is used for transferring the video signal from
the receiver module to the Control Panel.
The purely digital part (DVI-D) is supported.
DVI data transfer
DVI Extension The DVI extension connection (X 104) is used for transferring the DVI
signal from the transmitter module to the receiver module.
10 DVI/USB extension C9900-A17x