Power supply (x102), X102, Usb-e input (usb-extended) (x103) – BECKHOFF CP790x-140x User Manual
Page 14: X103, Protective earthing, 2 power supply (x102), 3 usb-e input (usb-extended) (x103), 4 protective earthing
Product Description
2.4.2 Power Supply (X102)
X102
SG 4-pole M12 built-in-PCB-sold. IP67 BINDER (BINDER 09-3431-90-04 prod. 763 M12X1)
View solder connection sided
The power supply for the Control Panel is established via the 4-pole M12 socket (X102). The protection
class of the circular plug-in connector accords to the IP67-standard.
Pin
Signal
Pin
Signal
1 +
24V
3 GND
2 NC
4 NC
2.4.3 USB-E Input (USB-Extended) (X103)
X103
SG 8-pole M9 built-in-PCB-sold. IP67 BINDER (BINDER 09-0427-30-08 prod. 712 M9X0,5)
View solder connection sided
The Control Panel is connected with the CU8800 USB to USB extended converter box via the USB-
Extended input (X103).
In order to realize a distance of 50 m without hubs, with USB extended the USB signal is converted so
that it can be transferred via 50 m CAT5 cables commonly used for Ethernet wiring. In the Control Panel
the signal is converted back to USB.
Pin
Signal
Pin
Signal
1 NC
5 USB
Tx-
2
USB Rx-
6
USB Tx+
3
USB Rx+
7
15V USB_E
4 GND
8 GND
2.4.4 Protective Earthing
The low resistance protective earthing connection of the Control Panel is established via the ground bolt,
which is located in the connection area.
12
CP790x-140x