Connector description, Serial interface, Usb interfaces – BECKHOFF CP6608 User Manual
Page 8: Network interfaces, Power supply, Status-leds, Ordering option, Status-leds 6
Product Description
Connector description
Serial interface
Serial interface
COM1
The Control Panel is equipped with a COM1 (X 102) serial interface (Type
RS232) for the connection of serial peripheral devices.
USB interfaces
USB out
The two USB interfaces (X 103, X104) (connector type A) are used for
connecting peripheral devices with USB connection.
USB2.0 standard is supported.
Network interfaces
Network
The RJ-45 sockets (X 105, X 106) enable connection of the Control Panel
to a 10/ 100 MBit Ethernet network.
Power supply
Power
The power supply for the Control Panel is established via the
socket (X 107).
Status-LEDs
Description of the Status-
LEDs
The Status-LEDs are located near the Power Connector.
P101
-
-
P102
24 V in
Power Supply is established
P101
P102
Ordering Option
Option
C9900-E197
“Economy"-Einbau-Control-Panel CP6608
Version: Building Automation
18 pin connector instead of RS232 serial port with 2 digital inputs for
24 V, 2 digital outputs for 24 V, PT100 sensor input, stereo sound line out
and microphone in
6
CP6608