Usb interfaces (x112, x113), Atx push-button, Reset-button – BECKHOFF C5210 User Manual
Page 12: Status leds, Rear view of the c5210, 240vac full range power supply, Reset-button 10, 240v, Full range power supply, 2 atx push-button
Product Description
2.4.1 USB Interfaces (X112, X113)
The two USB interfaces (X112, X113) are used for connecting peripheral devices with USB connection.
USB2.0 standard is supported.
2.4.2 ATX Push-button
The Industrial PC is switched on via the push-button (ATX) (Power on).
2.4.3 Reset-button
The reset-button enables re-booting the Industrial PC.
2.4.4 Status LEDs
• The LED HDD is illuminated at HDD access.
• The LED PWR is illuminated when power is on.
• The LED FB is a multi color LED and shows the status of fieldbus and TwinCAT:
Color LED FB
Description
red TwinCAT
STOP
blue TwinCAT
CONFIG
blue/ red blinking
TwinCAT CONFIG with Bus Error
green TwinCAT
RUN
green/ red blinking
TwinCAT RUN with Bus Error
2.5 Rear view of the C5210
The C5210 Industrial PC is fitted with a 100-240 V, 50-60 Hz full range power supply unit.
Optional a 24 V
DC
power supply unit with UPS is available.
2.5.1 100-240V
AC
Full Range Power Supply
Rear view C5210
with 100-240V
AC
full range
power supply
main switch
battery, optional fieldbus
interfaces
PCIe module slots
power supply
10
C5210