Becker EDITION TRAFFIC ASSIST PRO 7929 TMC - Manual (Page 19)

19
General operations
There is a card slot on the left-hand side
of the unit. The card compartment is
equipped with a spring-actuated lock
and ejection mechanism.
Inserting the SD memory card
X Remove the SD memory card from its
packaging without touching or soiling
the contact bar.
X Hold the SD memory card such that
the contact bar faces towards the rear
of the unit.
X Insert the SD memory card into the
card slot.
X Using slight pressure, push the SD
memory card into the card slot until it
engages.
Ejecting the SD memory card
The card slot ejects the card so that you
can pull it out with two fingers.
X Gently push the SD memory card all
the way into the card slot against the
tension of the spring.
X Then release the card.
The card is ejected.
X Remove the memory card and place it
in the packaging while ensuring not to
touch contact bar.
Notes:
The memory card should only ever be
inserted and ejected when the unit is
switched off. If the unit is not switched
off, data may be lost.
Navigational operations are not possible
if the memory card containing card
data is not inserted. If you remove this
during navigation, directions to your
destination will be aborted immediately.
10129