Baumatic BDWI660 - Manual (Page 24)

o
Add detergent
o
Turn the appliance on by using the ON/OFF button
(5).
o
IMPORTANT: Wait for 5 seconds before pressing the
program selection button, otherwise the appliance may
not function correctly.
o
Press the program button (4) to choose an appropriate
wash program for the load that you are washing. The
relevant program indicator will light on the LED display
to show which program you have selected.
o
Close the door firmly, so that you hear the door lock click shut.
o
After a few seconds, you will hear the appliance begin to fill with
water and the wash program will have started.
Changing the wash program
IMPORTANT: This should only be attempted when the cycle has
only just started, otherwise the detergent may have already
been released or you could have hot water escaping.
o
Slightly open the door of the appliance and press the program
button for about 3 seconds.
o
The machine will cancel the program in progress and you can
then select the required program as usual.
Adding more dishes
IMPORTANT: This should only be attempted when the cycle has
only just started, otherwise the detergent may have already
been released or you could have hot water escaping.
o
Open the door a little way to pause the current program. Wait
until the spray arms have stopped rotating before opening the
door fully.
24