Baumatic BDWI660 - Manual (Page 14)

Filling with rinse aid
The rinse aid is released during the final rinse and it helps
to prevent water from forming droplets on your dishes.
These droplets will lead to spots and streaks being left on
items after the wash program has completed.
o
Your dishwasher is designed to utilise liquid rinse aid.
o
The rinse aid dispenser is located inside the drop down door,
next to the detergent dispenser.
o
To access the rinse aid dispenser, you should turn the cap
anticlockwise and it will pop out of the hole. Then slowly pour in
liquid rinse aid, the rinse aid dispenser will hold approximately
110 ml of rinse aid.
o
Be careful not to overfill the dispenser, as this could cause
oversudsing when a wash program is selected. Wipe away any
rinse aid excess or spillages with a damp cloth.
o
Replace the cap and turn it clockwise until it locks into position.
o
You should refill the rinse aid dispenser when the
rinse aid indicator lights on the control panel.
o
IMPORTANT: If you are using 3 in 1 dishwasher tablets then
you should still fill the rinse aid dispenser.
14