Baumatic BDWI660 - Manual (Page 12)

IMPORTANT: It is only necessary to do this when you fill
the container with salt for the first time.
o
Pour salt into the water softener, using the funnel that is
supplied with the appliance. You should add approximately 1.5
kg of salt into the water softener.
o
It is perfectly normal for a small amount of water to come out of
the water softener, whilst you are filling it with salt. This does
not mean that the water softener is filled with the correct
amount of salt.
o
Refit and fully tighten the water softener cap.
o
The salt required warning light will go out
shortly after you have filled the water softener
with salt. When the salt indicator lights on the
control panel, then you should follow the filling
with dishwasher salt procedure again.
o
IMPORTANT: You do not need to pour 1 litre of water into
the container when you subsequently fill the water
softener with salt.
12