Baumatic BDWI660 - Manual (Page 15)

Setting the rinse aid level
The amount of rinse aid that the dishwasher requires also depends on
the hardness of your water. You should experiment with the rinse aid
setting, until you find a level that gives the best results.
o
On the first wash cycle, we would recommend that the rinse aid
level is set to number 4.
o
If you get water spots and poor drying performance, then you
should turn the arrow anticlockwise and increase the setting to
the next number.
o
You should continue to adjust the rinse aid level upwards until
you get no water spots.
o
If you get cloudiness or streaking on your dishes, the rinse aid
level is set too high and it is causing foaming during the wash
cycle. Turn the arrow clockwise and lower the setting to the next
number.
Filling with dishwasher detergent
o
The detergent dispenser must be refilled at the start of each
wash cycle.
o
Your dishwasher uses less detergent and rinse aid than a
conventional dishwasher.
o
In general, only one tablespoon of detergent is needed for a
normal wash load. More heavily soiled items may need more
detergent.
o
Always add the detergent just before starting the wash program,
otherwise the detergent could get damp and not dissolve
properly.
15