Baumatic BOD890BL - Manual (Page 30)

Replacing the mains supply cable
o
If the mains supply cable is damaged, then it must be replaced
with a suitable replacement which can be obtained via the
manufacturer, in order to avoid a hazard.
o
The mains supply cable should be replaced in accordance with
the following instructions:
o
Switch the appliance off at the socket.
o
Open the terminal block on the back of the oven.
o
Unscrew the terminal screws fixing the cable.
o
Replace the cable with one of the same length and in accordance
with the specification.
o
The “green-yellow” earth wire must be connected to the terminal
marked
. It must be about 10 mm longer than the live and
neutral wires.
o
The “blue” neutral wire must be connected to the terminal
marked with letter (N) - the live wire must be connected to the
terminal marked with letter (L).
o
The connection cable must be secured in a strain-relief clamp.
30