Figure 4-4. ac input connections – Basler Electric BE1-50/51M User Manual

Page 36

4-4

BE1-50/51M Installation

9252000990 Rev R

Connections should be made with minimum wire size of 14 AWG except as noted for the ground wire.

Typical ac input and dc control connections are shown in Figures 4-4 and 4-5. The auxiliary output jumper

configuration schematic diagram is also shown in Figure 4-5. Relay internal connections are shown on the

back of the relay. Figure 4-6 shows a rear view of the relay and the connections.

Figure 4-4. AC Input Connections