Baja Motorsports X250 - Manual (Page 27)

1. Inspect the front disk brake caliper for leakage. If brake fluid leaks, the safety
of riding could be affected.
2. Inspect the brake hose for cracks, and the joint for leakage.
3. Check the brake fluid level in the brake fluid reservoir, if level is at or below the
LOWER mark, inspect brake pads for wear and hydraulic system for leaks.
4. To add brake fluid, unscrew the 2 screws on top of the brake fluid container.
Add DOT3 or DOT4 brake fluid. Do not mix brake fluid types.
FRONT HYDRAULIC DISK BRAKE INSPECTION
1. Inspect the rear disk brake caliper for leakage. If brake fluid leaks, the safety of
riding could be affected.
2. Inspect the brake hose for cracks, and the joint for leakage.
3. Check the brake fluid level in the brake fluid reservoir, if level is at or below the
middle of sight window inspect brake pads for wear and hydraulic system for leaks.
4. To add brake fluid, unscrew cap on top of brake fluid container. Add DOT3 or
DOT4 brake fluid. Do not mix brake fluid types.
REAR HYDRAULIC DISK BRAKE INSPECTION
Sight gauge
Brake fluid
reservoir
Brake fluid cap Rear disk brake caliper
Brake hose
Brake fluid level
Brake fluid cap
Brake hose
Front disk brake caliper
Lower mark
Brake fluid reservoir
MAINTENANCE
24