BAFO BF-6200 - Manual (Page 13)

USB 2.0 to IDE 2.5” hard disk Enclosure User’s Manual 13
7.8 Windows ® XP installation
It doesn’t need to install any extra driver at Windows ® XP
7.8.1 Connect the USB port of USB2.0 to IDE 2.5” hard disk enclosure to PC
with USB cable. System will auto detect the device and load driver then
create a new device of “New Volume (F:)” at “My Computer” as shown
below.
7.8.2 You could check “My Computer”-“Control Panel”-“System”-”Device
Manager” to make sure the driver has already installed. Then, in the
“Disk Drives” it will show a “IBM-DJSA-210 USB Device” (This model
number will vary with different Hard Disk), and in the “Universal Serial
Bus controller” it will show a new item of “USB Mass Storage Device”.