BAFO BF-6200 - Manual (Page 11)

USB 2.0 to IDE 2.5” hard disk Enclosure User’s Manual 11
7.6 Windows ® 2000 installation
It doesn’t need to install any extra driver at Windows ® 2000
7.6.1 Connect the USB port of USB2.0 to IDE 2.5” hard disk enclosure to PC
with USB cable. System will auto detect the device and load the driver
then create a new device of “New Volume (F:)” at desktop as shown
below.
7.6.2 You could check “My Computer”-“Control Panel”-“System”-”Device
Manager” to make sure the driver has already installed. Then, in the
“Disk Drives” it will show a “IBM-DJSA-210 USB Device” (This model
number will vary with different Hard Disk), and in the “Universal Serial
Bus controller” it will show a new item of “USB Mass Storage Device”.