Baby Lock Anna (BL20A) Instruction and Reference Guide - Manual (Page 68)

62
q
w
e
w
e
z
x
c
q
Replacing the Bobbin Holder
z Insert the bobbin holder into the hook race.
x Make sure the knob of the bobbin holder fits
next to the stopper on the race.
q Knob
w Stopper
c Replace the bobbin.
Align the needle plate into the position on the
machine with the hook cover plate toward the
front. Insert the 2 screws in to the holes in the
needle plate.
Tighten the screw firmly with the screwdriver.
e 2 screws
Replacing the Light Bulb
WARNING:
When replacing the bulb, switch off and unplug
the machine.
Wait for the light bulb to cool down before
touching it.
Remove the cap and screw. Remove the face
plate.
q Screw
w Face plate
Looking up into the socket opening, turn the bulb
counterclockwise to remove it; turn the bulb
clockwise to replace it.
e Light bulb (screw on type 120V-15W)