Baby Lock Anna (BL20A) Instruction and Reference Guide - Manual (Page 22)

16
q
w
e
r
t
q
w
e
(A)
(B)
Winding the Bobbin
Setting the spool
Place a spool of thread on the spool pin with the
thread coming off the spool as illustrated.
A: Press the large spool holder firmly against the
spool of thread.
q Large spool holder
B: For a small spool, use the small spool holder.
w Small spool holder
NOTE:
Spool holders should always be the same size or
larger than the spool of thread that is being used
to avoid thread getting caught on rough edges of
the spool.
Additional spool pin
The additional spool pin is for bobbin winding
without unthreading the machine.
Insert the additional spool pin into the hole.
Place the felt and a spool on the pin.
e Additional spool pin
r Spool pin felt
t Spool pin hole
Removing the bobbin
z Push the hook cover plate release button to
the right and remove the cover plate.
q Hook cover plate release button
w Hook cover plate
x Lift out the bobbin.
e Bobbin
z
x