Specifications, Appendix a-19 – Baby Lock Crescendo (BLCR) Instruction and Reference Guide User Manual
Page 209
SPECIFICATIONS
Main
te
nan
ce
a
nd
Tr
oubl
es
hoo
ting
Appendix A-19
A
1
*
Please be aware that some specifications may change without notice.
This key does not operate when the needle is down. Raise the
needle and press the key again.
This message is displayed when a key on the LCD display is
touched while the needle is in the down position.
This pattern cannot be sewn with this mode.
This message is displayed when the selected stitch is not
available for the specific function.
This stitch is not “Dual Feed Mode” compatible.
This message appears when the dual feed foot cannot be used
with the current stitch. Select other stitch. (see page B-55)
This USB media cannot be used.
This message is displayed when you try to use incompatible
media.
This USB media is incompatible.
This message is displayed when you try to use incompatible
USB media. For a list of compatible USB media, visit
“ www.babylock.com ”.
Transmitting by USB
This message is displayed while the USB media is
transmitting.
Turn off the power and replace the needle plate.
This message is displayed when you try to sew with a stitch
other than a middle needle position stitch while the single-hole
needle plate is installed.
USB media error
This message is displayed when an error occurs with the USB
media.
USB media is not loaded. Load USB media.
This message is displayed when you try to recall or save a
pattern while no USB media is loaded.
Use the presser foot lifter button to lower the presser foot.
This message is displayed when a button, such as the
“Start/Stop” button, is pushed while the presser foot is raised.
When the speed controller is set to control the zigzag stitch
width, the "Start/Stop" button does not operate.
This message is displayed when the speed control lever is set
to control the zigzag stitch width, and the “Start/Stop” button
is pushed. Use the foot controller to operate the machine.
SPECIFICATIONS
Item
Specification
Sewing Machine and Accessories
(Box 1 of 2)
Dimensions of machine
Approx. 57.1 cm (W) × 33.5 cm (H) × 28.4 cm (D) (approx.
22-1/2 inches (W) × 13-1/16 inches (H) × 11-3/16 inches (D))
Dimensions of box
Approx. 68.5 cm (W) × 55.0 cm (H) × 37.7 cm (D) (approx.
26-15/16 inches (W) × 21-5/8 inches (H) × 14-13/16 inches
(D))
Weight of machine
Approx. 15.4 kg (approx. 33.9 lb)
Weight of box (for shipping)
Approx. 22.0 kg (approx. 48.5 lb)
Sewing speed
70 to 1050 stitches per minute
Needles
Home sewing machine needles (HA
× 130)
Extension table box
(Box 2 of 2)
Dimensions of extension table
Approx. 63.6 cm (W) × 9.8 cm (H) × 40.6 cm (D) (approx.
25-1/16 inches (W) × 3-7/8 inches (H) × 16 inches (D))
Dimensions of machine with extension
table attached
Approx. 81.1 cm (W) × 33.5 cm (H) × 40.6 cm (D) (approx.
32-1/16 inches (W) × 13-1/16 inches (H) × 16 inches (D))
Dimensions of box
Approx. 66.3 cm (W) × 42.7 cm (H) × 5.8 cm (D) (approx.
25-1/16 inches (W) × 16-13/16 inches (H) × 2-5/16 inches (D))
Weight of extension table
Approx. 2.2 kg (approx. 4.9 lb)
Weight of box (for shipping)
Approx. 3.0 kg (approx. 6.7 lb)
Total Shipping Weight (Combination of 2 boxes complete)
Approx. 27 kg (approx. 59.6 lb)
Marks
Error Messages
Cause/Solution