B.C. Time Recorders Amano TCX 21 - Manual (Page 6)

Make a Test Print
1. Make sure that there is power to the TCX-21 (Refer to Page 3).
2. Insert a piece of paper or time card into the TCX-21. The clock will
automatically print YEAR, MONTH, DATE and TIME with AM or PM.
3. If the imprint is satisfactory, the TCX-21 is ready for use.
4. If you wish to change the time and/or print style on the TCX-21, you
must enter the Program Mode to make changes to the print style.
Continue to the next page for instructions on programming the TCX-
21 to fit your needs.
Adjusting the Margin
1. Unlock and remove the cover.
2. Locate the Card Stopper
Adjustment Screw on the
right side of the clock,
below the printer platen.
3. Position a piece of paper or time
card as desired.
4. Loosen the screw to move the
Card Stopper forward or back.
Tighten the screw as needed.
(See top illustration.) The print
margin can be adjusted to a
maximum of 7/8” (22 mm).
Page 4