Daewoo CT6600 - Manual (Page 13)

13 DAEWOO CT6600
How to remove
1 . Locate the two clips that hold the memory module in place. One clip holds
the left edge of the module and the other clip holds the right edge.
2. Push one clip away from the module. Then, while holding the module
with one hand, push the other clip away from the module.
3. Lift the module out of the socket
1. Unscrew and remove an empty slot guide
2. Put an Add-On Card in the empty PCI slot carefully.(be careful to the
d i rection of the card)
3. If there are cables that should be connected to the Add-On card, please
connect to it.
4. Screw the guide of the Add-On card.
DIMM
Memory module
DIMM Socket
System disassemble & upgrading
CT6600øµ π Æmenual 89.6.16 11:13 AM ∆ ‰¿Ã¡ˆ13