Daewoo CT6600 User Manual
Page 11
board, to avoid possible damage to the system board.
4. Touch an unpainted metal surface on the computer chassis, such as the
power supply, before touching anything inside your computer.
To avoid static electricity that might harm internal component, please touch
an unpainted metal surface on the computer chassis periodically.
Touching components or contacts on a card or pins on a chip might cause
damage of components.
This section describes how to disassemble PC for adding RAMs, installing MR
card and installing PCI
option card etc.
Opening the Computer
System disassemble & upgrading
11
DAEWOO CT6600
1
DISCONNECT POWER
CONNECTOR
LOOSE THESE SCREWS
LOOSE THESE SCREWS
2
3
CT6600øµ
π
Æmenual 89.6.16 11:13 AM
∆
‰¿Ã¡ˆ11