Daewoo CT6600 User Manual
Page 12
This section is to describe that upgrading memory and Installing the PCI
option card.
Upgrading Memory
This model has 64 Mbytes memory as a default and you can upgrade max
256 Mbytes when you need.
How to install
1 .Locate the two clips that hold the memory module in place. One clip holds
the left edge of the module and the other clip holds the right edge.
2 . Push both clips away from the socket.
3 . Position the DIMM over the socket so that the notch at the bottom of the
module lines up over the divider in the socket. As shown in the next
p i c t u re, match the wide part of the module to the wide part of the opening
in the socket
4 . Push the module straight into the socket.
12
DAEWOO CT6600
CT6600 USER
°Ø
S GUIDE
notches
To insert DIMM module :
Position botton notches
over socket dividers
shown
DIMM
Memory module
DIMM Socket
CT6600øµ
π
Æmenual 89.6.16 11:13 AM
∆
‰¿Ã¡ˆ12