Awind wePresent WiPG-1500 User's Manual - Manual (Page 63)

63
10.4.4 OSD Setup
1) Click on “OSD Setup” option, you can:
Change Standby Image

Type: Replace Logo Image: Replace logo image only.
Replace entire standby image: Replace the whole
standby image

: Restore to default Logo image.

: Enter or browse the file name and upload the
customized Logo Image. Please refer to remark on screen when select the
file.
You can also adjust the following “Display Option”

Device Information

Font Size

Screen Saver Settings: Enable or disable the screen saver and also
configure the idle time(Minutes). (default is 5 mins)
: Press “Apply” button after configuration, and follow the reboot instruction
when applicable.
: Press button to abort action.