Awind wePresent WiPG-1500 User's Manual - Manual (Page 12)

12
6
Quick Installation
1) Connect wePresent WiPG-1500 device to Projector/display through VGA/HDMI
port and turn on projector/display power.
2) Connect the power adaptor to WiPG-1500 device and press the power button to
turn on WiPG-1500 device. System will be ready when the LED light turns to green.

It will show the default standby screen as below when system is ready.
3) Insert the speaker cable to WiPG-1500 audio jack for audio output
4) Insert the USB mouse or keyboard/AirPad to WiPG-1500 front/rear USB port for
On-Screen Display (OSD) control. (Optional)
5) Insert the USB IWB/Touch Screen cable to WiPG-1500 rear USB port for UST/IWB
remote touch control if needed. (Please noted that the front 2 USB ports do not
support UoIP function).