Aviosys 9211 - Manual (Page 46)

5. Use this IP address to update again. We supply original firmware V1.22 for update f
6. Log in this address to update again.
7. If still cannot finish update successful, please check if create BIN file too big.
If need to ship BIN file, please use bin file V1.22.bin in SDK to update back to factory version.
10. FAQ (Frequently Asked Questions)
Q1 : I forgot the password and can not enter the administration page now, what can I do?
A1 : Turn on the power normally, and then click the ipedit.exe program to enter the web page. Type in
the username “super user” (there is a space between super and user) and press ok then press the
reset button in 9200; it will back to the default settings. Now you can enter the administration page.
Q2
: I cannot open the IE web page, why?
A2 : Please update your IE or use the up-to-date version of Netscape browser.
Q3
: Why the on/off operation can work immediately?
A3 : if you operate the IP Sensor 9201 Input in Ethernet, the operation will work immediately. If you
operate it through the Internet, the response speed depends on the situation of the network. Normally
the delay is not obvious because the date need to be transported during operating the IP Sensor 9201
Input is very little.
46