Aviosys 9211 - Manual (Page 20)

Show in “Read I/O” page
Memory Function : User can save user name list in memory and call back the
setting as user get the default name after update firmware or after press H/W reset
button .
6.3 System Configuration
Setting the IP address for IP Power 9222 :
Click the “Setup“ button on the left side under system.
Fill in the proper IP address, Subnet Mask, Default Gateway, and DNS. If you choose to use DHCP,
please make sure that your network supports DHCP service so the IP Power 9222 will automatically
find an IP address when it starts. You can also control the Beeper sound in system configuration..
20