Avionics Innovations AM/FM Receiver P/N: 15001-00 - Manual (Page 6)

Avionics Innovations
AI-AM/FM RECEIVER Operation And Installation Manual
SEARCHING FOR STATIONS AUTOMATICALLY
1. Select the desired band with BAND button.
2. Press either one of the SEEK buttons.
The scanning stops on the next receivable station. Press button repeatedly until the desired station is received.
TUNING IN BY ADJUSTING THE FREQUENCY
-MANUAL TUNING
Select the desired band with BAND button, then press either of the manual tuning buttons.
MEMORIZING STATIONS
Each PRESET button (1-6) can be programmed to memorize one station per BAND selection ( FM1 / FM2 / FM3).
1. Select desired band with the BAND button.
2. Tune in desired station with the SEEK or TUNE buttons.
3. Press and HOLD one of the PRESET buttons for at least 3 seconds, "P" indicator and button number selected will appear on
display after station has been stored in the memory.
4. Repeat steps 2 and 3 to enter additional stations.
Repeat entire procedure for each band to memorize a total of 18 stations.
5. Memory will be erased with power interruptions.
Revision A July 23. 1998
Page 5