Avionics Innovations AM/FM Receiver P/N: 15001-00 - Manual (Page 10)

Avionics Innovations
AI-AM/FM RECEIVER Operation And Installation Manual
INSTALLATION INSTRUCTIONS
NOTE
FOR TECHNICAL ASSISTANCE PLEASE CALL 760-788-2602 8:00 AM TO 5:00 PM PST.
ALL REPAIRS AND RETURNS ARE PROCESSED THROUGH AVIONICS INNOVATIONS
1. SELECT AN APPROPRIATE LOCATION IN THE INSTRUMENT PANEL FOR THE AI-AM/FM RECEIVER TRAY.
A. LOCATION SHOULD BE AS NEAR TO CENTER TO MAXIMIZE VIEWING QUALITY.
2. MOUNT TRAY IN LOCATION USING 4 6/32 COUNTERSUNK SCREWS.
SCREWS MUST MOUNT FLUSH TO THE INSIDE OF THE TRAY FOR CLEARENCE.
3. WIRE THE UNIT AS PER DIAGRAM.
4. INSTALL ANTENNA ON BOTTOM OR TOP OF AIRCRAFT USING APPROVED PRACTICES AND
DATA.
5. USE RG 142 FOR ANTENNA LEAD.
INSTALLATION NOTES:
1. IN SOME INSTALLATIONS THE RADIO RECEPTION MAY BE POOR ON THE GROUND. THIS IS NORMAL, AN
IN-FLIGHT OPERATIONAL CHECK SHOULD BE ACCOMPLISHED AFTER INSTALLATION TO ENSURE
PROPER RADIO RECEPTION.
2. *** ( 14 VOLT SYSTEMS ) LOW BATTERIES MAY HINDER OPERATION PRIOR TO ENGINE START
3. CONSULT THE INTERCOM MANUFACTURER FOR SPECIFICATIONS AND HOOKUP INSTRUCTIONS.
4. ON MONO INSTALLATIONS REFER TO THE INSTALLATION SCHEMATIC FOR PROPER
INSTALLATION.
5. UNIT MUST BE COMPLETELY SEATED IN TRAY TO ENSURE PROPER CONNECTION.
POST INSTALLATION CHECKOUT
1. ENSURE UNIT OPERATES ACCORDING TO OPERATION OF CONTROLS EARLIER IN THIS MANUAL
NOTE
THIS UNIT IS EQUIPED WITH A CLOCK FUNTION, BUT DUE TO THE DIFFERENT VOLTAGE
ENVIRONMENTS THIS UNIT SERVES, IT CANNOT BE RELIED ON AS A TIME KEEPING DEVICE. PLEASE
ENSURE OWNER IS BREIFED ON THIS NOTE.
Revision A July 23. 1998
Page 9