Avionics Innovations DMP-200 (MP3 Player) Installation Manual User Manual
Page 5
DMP-200 INSTALLATION MANUAL
PAGE 5 OF 18
P/N DMP8012-00 REV E
1.
Introduction
1.1
Description
The DMP-200 Digital Media Player is a self-contained unit which stores and replays pre-
recorded audio tracks. The audio tracks are encoded in “Motion Picture Expert Group
(MPEG) Level 3” format, commonly referred to as “MP3”. Audio files are stored in a
removable CompactFlash™ memory card which is prepared and installed by the user.
Audio tracks are selected via a single rotary pushbutton on the front panel of the
DMP-200. Optionally, the DMP-200 may be connected to a maximum of three external
discrete trigger inputs, each of which can be configured in software to select a particular
audio track.
The DMP-200 accepts a power input of between 10VDC and 35 VDC and provides a
single pair of ground-referenced stereo line-level audio output signals. A Mono output
which combines the Stereo line level outputs is also available.
The DMP-200 has been designed and tested to the Environmental Specifications of
RTCA DO-160E. An Environmental Qualification Form which describes the various
parameters and the levels to which they were tested is available upon request from
Avionics Innovations.
1.2
Scope
This document describes the installation and initial checkout of the DMP-200 Digital Media
Player. It may be used to support all installations, including those intended for initial Type
or Supplemental Type Certification approvals and FAA Form 337 Field Approvals.
1.3
Installation Kit
Before beginning the installation, verify that the following items are present:
Qty
Part No.
Description
1
20000
Digital Media Player Main Unit
1
DMP200-20
DMP-200 Installation Kit, consisting of:
1
DMP1010-00
(1ea) Mounting Tray
14046-00
(1ea) 16-pin Molex Connector
14400-00
(16ea) Molex Contacts
14073-00
(2ea) 4-40 X 3/8 Pan Head Screws
for Molex Connector
DMP057
(1ea) 256MB CompactFlash™ Memory
Card
DMP8012-00
(1ea) DMP-200 Installation Guide
DMP8011-00
(1ea) DMP-200 Operators Guide
DMP200-01
(1ea) DMP200 Card Prep Software
1
DMP058
(OPTIONAL) USB reader/writer for
CompactFlash™ cards