Avionics Innovations DMP-200 (MP3 Player) Installation Manual User Manual
Page 16
DMP-200 INSTALLATION MANUAL
PAGE 16 OF 18
P/N DMP8012-00 REV E
6.2
Error Messages
In addition, the DMP-200 may display the following error messages:
Display
Meaning
Possible Causes
Invalid Card, no
firmware.
The firmware update file,
“0000.hex”, cannot be opened
on the CompactFlash card.
•
The card was not prepared
using DMP200 CardPrep
software
•
The card was created for a
DMP100
Invalid Card, no MP3
config.
The MP3 configuration file,
“0000.xd3”, cannot be opened
on the CompactFlash card.
•
The card was not prepared
using DMP200 CardPrep
software
•
The card was created for a
DMP100
Internal error number
XX
A fault has occurred between
the two internal processors of
the DMP200.
Contact Avionics Innovations.
Please record the error number
shown on the display.
Memory Card Not
Inserted!
The DMP200 is not detecting
the presence of a
CompactFlash card.
•
No card is inserted
•
The card is defective
•
The card is not fully seated