Avalon Firestyles DVS Fireplace EF-2001 to 2007 - Manual (Page 12)

1 2
Installation
(for qualified installers only)
© Travis Industries 4041213 1 0 0 - 0 1 1 5 2
Facing Detail
Access Door
1-1/2"
Face
1"
1-7/16” Lopi Discovery
1-7/16” Avanti DVS
7/16” FPX Rect. and Arched
Glass
1/8"
Air Space
The overlap is 1-1/2" along
the top of the face. NOTE:
Do not tuck tile underneath the face on the bottom (there
will be a 1/8" air space below the access door). You may
do this on the sides and top, but not on the bottom.
29-1/8”
20-3/8”
1" 1-1/2"
Make sure these shaded areas are faced over
when using the arched face. Rectangular faces
do not require this area to be faced.
2” 4-7/8”
• To achieve a facing that is flush with the drywall to the side of the fireplace, recess the framing directly
next to the fireplace. See the illustration below.
Fireplace
1"
1/2" Drywall
1/2" Concrete Board 3/8" Tile
This 2x4 is recessed 3/8"
to make a flush facing
Fireplace
1/2" Drywall
1/2" Concrete Board
3/8" Tile
The tile overlaps the drywall
for an overlap facing
Faceplate
1"
TOP
VIEW
Faceplate