ATI Audio MX200 - Manual (Page 15)

Audio Technologies Inc. 856-719-9900 [email protected] www. audio.com
SPECIFICATIONS
Output Level:
+4dBm Nominal into 600 ohm balanced or
unbalanced loads; +22dBm Max.
Distortion:
.0-20Hz to 20kHz at +4dBm.
Response:
+/- .25dB, 5 to 100kHz
Noise:
Microphone input: EIN= -126dBm; 50dB input gain.
Line Input: EIN= -84dBm; unity input gain
Gain:
Mic Inputs: +82dB Max; Line Inputs: +42dB Max.
Headphone Output: 100mW to 600/150-ohm phones, TRS jack.
Limiter:
5:1 slope, Attack time 25ms, Recovery time 200ms for
10dB change
Phantom Power:
+20VDC
DC Power:
24VDC Nom. 160mA MXS100, MX200C or MX200
=160mA, XPS100 = 90mA
XPS200 = 60mA
Dimensions in.(cm.): 1.75(4.45)H X 5.6(14.22)W X 5.75(14.6)D; 1.25lbs,
.57Kg.
MODELS AVAILABLE:
MXS100 Stereo Three Input Mic/Line Field Mixer
MX200C Stereo Three Input Mic/Line Studio Mixer with Limiter.
MX200 Stereo Three Input Mic/Line Studio Mixer.
XPS100 Stereo Four Mic/Line Input Expander.
XPS200 Stereo Two Stereo Line Input Expander.
Note: All units require a 24VDC power supply, which is ordered separately.
Several amplifiers can share a single supply-using loop thru DC cable (P/N
20602-1). Do not exceed rated supply current.