ATI Audio DDA416/WC106 - Manual (Page 13)

13
DDA‐416/WC106 Manual
DDA-416/WC106 SPECIFICATIONS
INPUTS
CONNECTORS XLR female for AES/EBU and AES Sync BNC for Word Clock
LEVEL XLR 200 mVp-p minimum; BNC 1 Vp-p minimum
IMPEDANCE
Transformer isolated, balanced and floating, XLR 110Ω, BNC 75 Ω;
input terminations may be switched in or out via front panel control
SAMPLE RATES 30kHz to 200kHz
OUTPUTS
AES/EBU OUT CONNECTORS 16 x XLR male
LEVEL 5 Vp-p loaded at 110Ω
IMPEDANCE 110Ω
JITTER < 800 picoseconds
CLOCK OUT CONNECTORS 6 x BNC
LEVEL 2 Vp-p loaded
IMPEDANCE 75Ω, unbalanced
LOOP-THRU XLR-M and BNC
INDICATORS
INPUT FAULT AES 1, AES 2, AES 3, AES 4, AES External Sync, Word Clock
INPUT TERMINATION Terminated or Un-terminated (OFF)
INPUT SAMPLE RATE 32, 44.1, 48. 88.2, 96, 176.4 or 192kHz
WORD LENGTH 16 Bits, 18 Bits, 20 Bits and 24 Bits
DIGITAL ERRORS Bi-Phase Parity, Validity, Non-Linear PCM and DTS-CD Signal
INPUT RE-CLOCKING On and Off
MODE Pro and Consumer
INPUT EQ Locked and Enabled
SOURCE MONITOR &
CONTROL
AES 1, AES 2, AES 3, AES4, AES External Sync, Word Clock
POWER
Internal Supply, 115/230VAC ±10%, 50/60Hz, IEC320 3 pin
connector
SIZE 2 RU Package, 19” (48.3cm) W x 3.5“ (8.9cm) H x 8.5” (21.6cm) D
WEIGHT 9 pounds (4.1 kg) net; 10 pounds (4.5 kg) shipping weight
WARRANTY Limited, One Year Warranty
Specifications are subject to change without notice to upgrade the performance of our products.