Commands execution – Artesyn ViewCheck on ATCA-9405 Installation and Use (May 2014) User Manual
Page 88

Commands Execution
ViewCheck on ATCA-9405 Installation and Use (6806800S51C)
88
OctDDR2Test (SP): This test executes the hw-ddr2 memory test on Octeons with ECC
check. This includes below set of memory tests:
–
Marching Rows
–
Random Data Test
–
Random XOR Test
–
Self Address Test
–
March C-Solid Bits Test
–
March C-Checkerboard Test
–
Walking Ones Left Test
–
Walking Ones Right Test
–
Walking Zeroes Left Test
–
Walking Zeroes Right Test
–
Random XOR Test
OctRCStressTest (SP): This test executes the hw-rc stress test on Octeon cores for 2
minutes. This test tries to simultaneously run as much of it internal machinery as possible
by performing BIST status check of all cores.
The OctDDR2Test (SP) tests memory up to 7692 Megabytes.
It does not check the memory range where boot loader and the test program itself resides.
- ViewCheck on ATCA-7370 Installation and Use (November 2014) ViewCheck on PrAMC-7311 Installation and Use (November 2014) ViewCheck on ATCA-F140 Installation and Use (September 2014) ViewCheck on ATCA-7470/7475 Installation and Use (September 2014) ViewCheck on ATCA-7470/7475 Installation and Use (November 2014) ViewCheck on PrAMC-7311 Installation and Use (September 2014) ViewCheck on ATCA-7470/7475 Installation and Use (May 2014) ViewCheck on ATCA-F140 Installation and Use (November 2014) ViewCheck on ATCA-9405 Installation and Use (September 2014) ViewCheck on ATCA-7480 Installation and Use (April 2015) ViewCheck on ATCA-9405 Installation and Use (November 2014) ViewCheck on PrAMC-7311 Installation and Use (May 2014) ViewCheck on ATCA-7370 Installation and Use (April 2014) ViewCheck on ATCA-F140 Installation and Use (April 2014)