Artesyn SAM1411 Installation and Use (September 2014) - Manual (Page 42)

SAM1411 Installation
SAM1411 Installation and Use (6806800M91B) 42
2. Check for damage and report any damage or differences to the customer service.
3. Remove the desiccant bag delivered along with the board and dispose of it
according to your country’s legislation.
4.3 Requirements
Before you power up the board, calculate the power needed according to your system
configuration.
4.3.1 Environmental Requirements
Make sure that the board, when operated in your particular system configuration, meets the
environmental requirements specified in
Table 4-1 .
The board is thoroughly inspected before shipment. If any damage has occurred during
transportation or any items are missing, then contact our customer's service immediately.
Operating temperatures refer to the temperature of the air circulating around the board and
not to the component temperature.
Board Damage
High humidity and condensation on the board surface causes short circuits.
Do not operate the board outside the specified environmental limits. Make sure the board
is completely dry and there is no moisture on any surface before applying power.