A.3 usb boot – Artesyn MVME2500 VxWorks 6.8 User Guide (April 2014) User Manual

Page 30

Sample Output

MVME2500 VxWorks 6.8 User Guide (6806800L66C)

CPU: Freescale P2010E - Security Engine. Processor #0.

Memory Size: 0x40000000. BSP version 2.0/2.

Created: Feb 23 2011, 15:31:29

ED&R Policy Mode: Deployed

-> 0xc92b50 (devConnect): vxbIntelAhciInstConnect pDev 0x2be358

0xc92b50 (devConnect): ahciDrv called 0xc8fa20 0xa4100000

Found Bulk Device with 1 Logical Units at node 2

Instantiating /ahci00:1 as rawFs, device = 0x50001

A.3

USB Boot

=> run vxusbboot

(Re)start USB...

USB: Register 10011 NbrPorts 1

USB EHCI 1.00

scanning bus for devices... 2 USB Device(s) found

scanning bus for storage devices... 1 Storage Device(s) found

reading vxWorks-2010.st

..................................................................

............................................

3160632 bytes read

## Ethernet MAC address not copied to NV RAM

## Using bootline (@ 0x4200): motetsec(0,0)10.130.101.216:vxWorks

h=10.130.101.216 e=10.130.101.250:ffffff00 u=vxworks pw=vxworks

f=0x80

## Starting vxWorks at 0x00100000 ...

Target Name: vxTarget

Bulk Class Driver Successfully Initialized

usbCbiUfiDevInit() returned OK

CBI Class Driver Successfully Initialized

0x46a9250 (devConnect): vxbIntelAhciInstConnect pDev 0x36ae50