A sample output, A.1 network boot, A.1.1 vxworks booting on core 0 – Artesyn MVME2500 VxWorks 6.8 AMP User Guide (August 2014) User Manual

Page 27: Sample output, Appendix a

Appendix A

MVME2500 VxWorks 6.8 AMP User Guide (6806800M27B)

Sample Output

A.1

Network Boot

A.1.1

VxWorks Booting on Core 0

MVME-2500 (Mon 1.0) => run vxboot

Speed: 100, full duplex

Using eTSEC1 device

TFTP from server 10.130.101.216; our IP address is 10.130.101.206

Filename 'vxWorks_00.st'.

Load address: 0x1000000

Loading:

#################################################################

#########################################

done

Bytes transferred = 3326700 (32c2ec hex)

## Ethernet MAC address not copied to NV RAM

## Using bootline (@ 0x4200): motetsec(0,0)10.130.101.216:vxWorks

h=10.130.101.216 e=10.130.101.206:ffffff00 u=vxworks pw=vxworks

f=0x80

## Starting vxWorks at 0x00100000 ...

Target Name: vxTarget

0x2541220 (devConnect): vxbIntelAhciInstConnect pDev 0x3888a8

Adding 8307 symbols for standalone.