Artesyn ATCA-7350 - Integrating with Workbench User Guide (September 2014) - Manual (Page 26)

Packaging
ATCA-7350 - Integrating with Workbench User Guide (6806800H90D) 26
A.3 Driver and Module Patches
Table A-3 describes the driver and module patches for ATCA-7350.
bnx2x.patch
This patch provides driver for 10GIGE 57710 Broadcom Ethernet
chip.
hpet-late-init-
fix.patch
Prevents kernel panic if HPET device is not detected early enough
while kernel loading.
tipc_patch.patch
Allows retransmission of TIPC packets for redundant links.
kexec_wdt_int.patc
h
This patch integrates watchdog and kdump to support the feature
for taking the system crash dump as a part of the watchdog
expiration action. This is useful for field debugging, especially in the
situation of board hang.
Table A-2 Kernel patches (continued)
Patch Description
Table A-3 Driver and module patches
Patch Description
bsp/custom_layer/template
s/packages/emrsn_kernel_m
odules-0.1.tar.gz
It contains external modules used for the ATCA-7350 layer.
6321_watchdog.patch
It is the watchdog driver for hardware watchdog on Intel
6321 i/o controller hub. It is used for supporting the on-
board watchdog.
drbd.patch
It supports the Distributed Replicated Block Device (DRBD)
feature.
ami_bios_driver.patch
It is used for accessing ami BIOS area and Firmware upgrade
utility.
e1000_driver.patch
It is the updated e1000 network interface module.
bnx2x.patch
It is the driver for broadcom switch.